ESAB Rogue EM 140 MIG Welding System (0700301082)
ESAB Rogue EM 140 is an inverter-based MIG/MAG welding system designed to address all your welding project needs from light fabrication to repair and maintenance. The system features industrial-grade arc performance and full featured controls that allow the welder to fine tune arc characteristics based on the material they are welding.
With a weight of only 13 kg (28.8 lbs), single voltage 120V single-phase input and compatibility with 6 kVA (4.8kW) generators, this system provides maximum flexibility and portability, both in the shop and in the field.
Features
- Large 14 Segment Display – instantaneous feedback for both voltage and wire feed speed for clear viewing
- Unique rugged industrial design – supporting multiple lift points and cable management
- Arc Dynamics - fine tune arc characteristics based on the material being welded
- Advanced control features – adjustable pre-flow and post-flow, burn back control, creep start and 2T/4T trigger latch
- Spool Gun Ready – Rogue automatically configures set up when spool gun is connected
- Weld material thicknesses up to 6 mm (1/4 in.)
- Energy Save Mode – after 2 minutes of inactivity the unit will enter this state to reduce power consumption
- IP23S rated for indoor/outdoor use
ESAB Rouge EM 140 System includes:
- ESAB Rouge EM 140 140A MIG/MAG Power Source
- Tweco Fusion 180 MIG/MAG Torch, 10' (3.0m)
- Victor Gas Regulator/Flow Gauge
- Return Cable Kit
- Gas Hose, 10' (3.0m)
- ESAB OK AristoRod .030 (2.2lb Spool)
- Drive roll, 0.6/0.8 mm (0.023/0.030 in.) installed
- Drive roll, VK 0.8/0.9 mm (0.023/0.030/0.035 in.) spare
- Contact Tips, 1 ea. 0.6, 0.8, 0.9 mm (0.023, 0.030, 0.035 in)
- Instruction manuals
3 Year ESAB Warranty
| Technical Data | |
|---|---|
| Voltage | 120 VAC 1, 50/60 Hz |
| GMAW Welding Output | 90 A / 18.5 V @ 30 % Duty Cycle 64 A / 17.2 V @ 60 % Duty Cycle 49 A / 16.5 V @ 100 % Duty Cycle |
| Current Range | 30-140 A |
| Voltage Range | 12-22 V |
| Wire Feeder Specifications | 2.0-11.4 m/min ( 75-450 in./min ) |
| Open Circuit Voltage | 50 VDC |
| Metal Mild Steel Stainless Steel Cored Wire Aluminum |
0.6-0.9 mm ( 0.023-0.035 in. ) 0.6-0.9 mm ( 0.023-0.035 in. ) 0.8-0.9 mm ( 0.030-0.035 in. ) 0.8-0.9 mm ( 0.030-0.035 in. ) |
| Max Spool Diameter | 100 & 200 mm ( 4 & 8 in. ) |
| Power Factor at Maximum Current | 0.80 |
| Efficiency at Maximum Current | 82.7 % |
| Energy Save Mode | <50 W |
| Operating Temp | -10 to +40 °C ( +14 to 104 °F ) |
| Enclosure Class | IP23S |
| Certification Mark | cETLus |
| Dimensions, L x W x H | 590 x 220 x 385 mm ( 23.2 x 8.7 x 15.2 in. ) |
| Weight | 13.1 kg ( 28.8 lbs ) |
ESAB 3 Year Warranty
